Li-ion Cordless Gas Nail Gun

The BOSI Black Warrior Cool Series Li-ion Cordless Gas Nail Gun utilizes a hybrid gas and battery technology, delivering strong bursts of power, requiring no air compressor or hose, and is portable and efficient.

The battery is 7.2V/1.5Ah, the magazine capacity is 30 rounds, and it is suitable for nail specifications: diameter 2.5-3.0mm, length 15-40mm. The bare unit weighs 3.3kg.

Suitable for high-intensity work such as concrete and steel structures, and for continuous nailing scenarios in construction, bridges, and decoration. Standard configuration includes two batteries and one charger.

What is a Li-ion Cordless Gas Nail Gun?

A gas nail gun is a fastening tool that uses the gas pressure generated by the explosion of a small gas canister as power, combined with a battery-powered ignition and nail delivery mechanism, to drive nails into hard substrates such as concrete and steel structures.

It differs from traditional pneumatic nail guns (which require an air compressor and hose) and electric nail guns (heavy and with limited power): the gas nail gun contains a disposable gas canister. When the trigger is pulled, the battery generates an electric spark, igniting the gas. The instantaneous expansion of the high-pressure gas pushes the piston, propelling the nail.

This method requires no external power source (only a small battery for ignition and nail delivery) and eliminates the need for a heavy air compressor and hose, achieving true wireless portability. Furthermore, the thrust generated by the gas explosion is far greater than that of ordinary electric nail guns, sufficient to drive nails into concrete and steel.

This BOSI Li-ion Cordless Gas Nail Gun is suitable for nail lengths of 15-40mm, has a 30-round magazine capacity, and is suitable for continuous operation. It is widely used in construction projects for fixing timber, installing light steel keel, constructing bridge formwork, and fixing doors and windows, making it an ideal replacement for traditional pneumatic nail guns and gunpowder nail guns.

Product Parameters

Product Comparison

FAQ

Q: What if the gas nail gun doesn't drive out nails?

A: Check if the gas canister is empty (shake and listen for the liquid sound); check if the battery has power; check if the nozzle is blocked by foreign objects; check if the temperature is too low (below 0℃ may be difficult to ignite, preheating is required); check if the nail is stuck (open the magazine and clean it).

Q: Insufficient nail depth or exposed nails?

A: Adjust the depth adjustment knob at the nozzle (usually has a setting); check if the air pressure is normal (pressure drops when the gas canister is almost empty); if the substrate is too hard (such as high-grade concrete), you can use a longer nail or switch to a gunpowder gun.

Q: How long can the gas cylinder last?

A: One gas canister can fire approximately 1000 nails (this varies slightly depending on ambient temperature, nail length, and substrate hardness). It is recommended to have a spare gas canister.

Q: Can it be used for high-altitude work?

A: Yes. This machine is wireless and lightweight (3.3kg), safer and more flexible than a pneumatic gun with a drag tube. However, you need to pay attention to fall protection at heights and wear a safety belt.

Q: Does it require routine maintenance?

A: Yes. After firing every few hundred rounds, remove the gas canister and battery, and clean the carbon deposits in the combustion chamber (using a special cleaner); clean the dust from the nozzle with a brush; periodically apply lubricating oil to moving parts.

Q: Can the nails be driven into brick walls?

A: Yes. Red bricks, hollow bricks, and aerated concrete blocks are all acceptable, but the appropriate nail length must be selected (the nails should not penetrate too far into the wall). Concrete load-bearing walls are most effective. For lightweight partition walls, self-tapping screws are recommended.